Click image to view full size image
Auto Fire Damper Shutter Frame Blade Louver Roll Forming Machine
1,Structure of equipment
This line is composed of de-coiler, punching, forming machine, cutting system, electric control system, etc.
2, Equipment composing parts
Equipment is composed of de-coiler, feed system, gap and cut off, forming machine, collection table, electric control system, etc.
3, Technical parameter of equipment main parts
3.1, Auto-decoiler
A, Load capacity: 2 T
B, Inner diameter of coil: 490-510mm
Outer diameter≤ 1200mm
3.2. Servo feed and punching unfilled corner parts
A, Servo motor: Used Mitsubishi Servo motor, power: 1.0kw
B, Punching unfilled corner die: 4 pillars punching die
C, Material of punching die: Cr12. Quenching treatment
3.3Feeding:
Power 0.37kw
3, 4Forming machine
A, Forming frame
B, Material of forming mould: GCr15, quenching treatment: Rigidity: HRC56-62º
C, Motor: 7.5kw frequency conversion engine
4, Electric control: PLC system
The operator can do the following
· The setting program (PLC)
· Monitoring the control process,
· Modify the control parameters,
· The length of the workpiece digital setting,
· The length of the workpiece adjusting.
· Running state real-time monitoring equipment and fault indication.
2- Mode of operation: manual / auto two. With manual, automatic switching function: in the manual mode, can be stand-alone operation, convenient repair; in the automatic mode, all production and operation, the start up sequence; along with the emergency stop button, easy to handle emergencies, to ensure the safety of equipment and personnel
Main Parameter
|
NO. |
Project |
Unit |
parameters |
Remark |
|
| 1 |
Material |
type | Mild steel,Galvanized sheet | ||
| Strengthof material sheet | Map | ≥350 | |||
| Thickness of material sheet | mm | 0.8~1.5 | |||
| 2 | Size of production | mm | Reference the picture | ||
| 3 | Production speed | m/min | 6~8 | ||
| 4 | Material of roller | GCr quenching treatment | |||
| 5 | Drive type | Gear box | |||
| 6 | Power | kw | About 34 | ||
| 7 | Electric control system | PLC variable frequency control | |||
| 8 | Dimensions(Length*width*height) | m | 28X4X3.9 | ||
Fire Damper Shutter Frame
Delivery of Machine
